ESCO SERIES F WITH ESCO MULTICROWN TOOTH FORM FOR LONG LIFE
The Esco gear coupling is a torsionally rigid grease filled coupling consisting of two hubs with external multicrown – and two flanged sleeves with straight internal teeth. The flanged sleeves are bolted together with high strength corrosion protected fitted bolts and nuts. The sleeve is at the opposite side of the flange executed with an endcap (internal for small and screwed for big size couplings) in which the o-ring is located for sealing purposes. The Escogear coupling has been designed to transmit the torque between these two flanges through friction avoiding fretting corrosion between these faces.
The teeth of hub and sleeve are continuously in contact with each other and have been designed with the necessary backlash to accommodate angular-, parallel- and axial misalignment within their misalignment capacity. The angular and parallel misalignment capacity is determined by the gear tooth design and is for the standard Escogear max. 1.5° degrees (2 x 0.75°) in total. The axial misalignment capacity is limited by the gear teeth length in the sleeve and can be varied (optionally).
Esco gear couplings for high torque applications. Available in variety of configuration giving flexibility for heavy duty, arduous applications.
- LOWEST torque/weight ratio. the highest torque/max. bore ratio.
- ALLOW: the combination of important angular, radial and axial misalignment, at the same time.
- ABLE: to rotate at high rotating speeds, without vibrations. to accept the largest possible assembly options to suit the design of the driver and the driven machine
Bore Capacity: 1130mm
Nominal Torque: 504kNm
Peak Torque: 1,008kNm
- Mill Drives
- Conveyor drives