Techtop’s TAP aluminium series motors are suitable for all industrial applications where optimal design performance and low weight are key factors.
0.06kW to 37kW – Frame 56 to 200L
Standard TAP series motors are designed with the following parameters:
380V to 415V, 50Hz & 440V to 480V, 60Hz supply Continuous (S1) duty
Ambient temperatures up to 40°C
Installation up to 1000 MASL
230V Delta / 400V Star (3kW & below) 400V Delta / 690V Star (4kW & above)
Dimensions and rated outputs for the TAP series conform to Australian Standard AS/NZS 1359 and International Standards IEC 60034 and IEC 60072.
The TAP range complies with MEPS2 requirements of AS/NZS 1359.5:2004 Table A3 (High Efficiency). Motors are tested in accordance with Test Method A of AS/NZS 1359.102.3 as per IEC 60034-2-1.
TAP motors are insulated with Class F materials and limited to Class B temperature rise. The windings are spike resistant making them suitable for use with VVVF drives.
As TAP series motors from 160 frame and above are fitted with one set of PTC thermistors. The thermistor termination is located in the main terminal box and has a trip temperature of 150°C as standard.
Additional 130°C thermistors can be fitted as an option for alarm connection. Thermistors are available as an option for smaller frame sizes.
The standard degree of enclosure protection for TAP series is IP66 Shafts are fitted with an oil seal on the Drive End and Non Drive End.
The TAP series motors are fitted with detachable feet. The multi-mount design allows for the motor feet to be removed and repositioned to either side to produce a side mounted terminal box.
Alternatively the feet can be removed and the motor mounted from any of the 16 mounting pads.
Fan & Gearbox application
TAP series motors are low weight design and come standard a drilled and tapped hole in the shaft which makes this series ideal for fan applications. This motor series is also ideally suited for fitting
to aluminium gearboxes. *Optional B5R flange is available for gearbox fitment – B5R flanges are one frame size smaller than standard B5 flanges.
The terminal box is manufactured from aluminium and is mounted on top of the motor as standard. Terminal box is separate to the motor body and can be rotated in 90° increments..
As standard TAI/TAP motors are powder coat finish with final colour being RAL 9005 Jet Black.
Other colours are available upon request.